A standard padel court has an internal playing area of 10 metres wide by 20 metres long, measured inside the surrounding walls and mesh. For a panoramic padel court, I recommend planning beyond the court itself: allow space for the steel-and-glass structure, installation access, drainage, lighting, circulation, and—where permitted—players moving outside the court to return the ball. In practical commercial planning, a project often needs a clear footprint of approximately 12 metres by 22 metres or more, while a larger site may be preferable for spectator areas, reception, changing facilities, and maintenance access.
This guide explains the core dimensions, surrounding space requirements, layout decisions, material options, and supplier questions that I use when helping B2B buyers evaluate a panoramic padel court project. Exact requirements can vary by federation rules, local building regulations, venue type, and whether the court is indoor or outdoor.
A panoramic padel court follows the same playing-area principle as other regulation-style padel courts: the enclosed play zone is 10 metres wide and 20 metres long. The court is divided by a net, and the end walls, side walls, and mesh form the playing enclosure. In a panoramic model, the traditional visual obstruction of heavy corner posts or extensive opaque panels is reduced through the use of large glass sections and carefully designed structural supports.
The 10 m × 20 m measurement should not be treated as the complete installation footprint. The actual outside dimensions depend on the thickness of the glass, steel profiles, mesh panels, door configuration, base frames, anchoring details, and the manufacturer’s engineering design. For this reason, I recommend requesting a dimensioned general-arrangement drawing before finalizing a site or concrete foundation.
It is useful to separate three measurements during project planning. The first is the internal playing area, which describes where the game takes place. The second is the external court footprint, which includes the enclosure and structural components. The third is the total site allocation, which includes walkways, equipment movement, spectator circulation, drainage, lighting controls, and other venue functions.
A buyer who reserves only 10 m × 20 m may discover that there is no practical room for assembly or safe circulation. I normally advise buyers to keep a preliminary rectangular allowance of at least 12 m × 22 m, then confirm the exact figure from the selected supplier’s technical drawings and local site conditions.
Padel courts use walls and mesh to keep the ball in play, so vertical clearance is an important part of the design. Many court configurations use solid or glass walls up to approximately 3 metres, with mesh sections or extensions reaching about 4 metres in selected areas. The final arrangement should be checked against the rules being followed, the intended competition level, and any requirements imposed by the venue or sports authority.
Indoor facilities also need sufficient building height above the court. A court may fit within a building by floor area but still be unsuitable if roof beams, ventilation ducts, lighting, sprinklers, or other services intrude into the playing envelope. I recommend creating a coordinated section drawing that shows the finished floor, court top line, lighting position, ceiling services, and maintenance access before ordering.
For outdoor panoramic padel courts, the glass and mesh enclosure acts as a significant wind-exposed structure. The required foundation and anchoring method depend on local soil, wind exposure, frost conditions, drainage, and engineering requirements. I do not recommend selecting anchor spacing or concrete details from a generic online dimension alone; these should come from the project’s technical design and site assessment.
The space outside the enclosure has several functions, and each should be considered separately. Players need safe access through doors, staff need room to inspect glass and mesh, and installers need a route for moving panels and steel components. Commercial venues may also require customer circulation, seating, advertising positions, ball storage, cleaning equipment, and emergency access.
For standard play, the court enclosure normally defines the active playing boundary. Some venues may choose to support play outside the court through dedicated access openings and clear run-off zones, but this is not automatically available on every panoramic model. If out-of-court play is important, I recommend confirming the approved opening arrangement, minimum clearances, surface continuity, and local safety rules at the design stage.
| Planning Element | Common Reference Point | Buyer Check |
|---|---|---|
| Internal playing area | 10 m × 20 m | Confirm whether the quotation measures internal or external dimensions. |
| Preliminary court footprint | About 12 m × 22 m or more | Verify with the supplier’s structural drawing. |
| Enclosure height | Approximately 3 m to 4 m in typical configurations | Check wall, mesh, competition, and local requirements. |
| Lighting planning | Often designed around LED systems | Confirm illuminance, glare control, mounting, and electrical load. |
A panoramic court usually combines tempered glass panels, galvanized or coated steel framing, welded mesh, posts, doors, anchors, and an artificial grass sports surface. The glass provides visual openness, but its thickness, edge treatment, fixing method, and protective design must be confirmed in the supplier’s technical documentation. I encourage buyers to evaluate the complete system rather than judging quality only by the appearance of the glass.
The playing surface is also important for ball response, player comfort, and maintenance planning. Sports artificial grass may be selected according to fibre type, pile height, backing construction, colour, infill approach, and drainage design. As a manufacturer and supplier associated with Artificial Grass & Sports Flooring, Tianjin juzhixin Sports can discuss the court surface together with the enclosure so that the floor, base, drainage, and installation sequence are considered as one project.
Tianjin juzhixin Sports supply professional and honest service.
Indoor courts usually offer more predictable weather protection, but the building must accommodate the court’s height, ventilation, lighting, humidity control, and maintenance route. Outdoor courts require closer attention to drainage, corrosion protection, wind, rainwater discharge, ultraviolet exposure, and foundation performance. Rooftop installations may need additional structural review because the building must support the court, players, equipment, and operational loads without compromising waterproofing.
Start by recording the site length, width, ceiling height if applicable, and fixed obstacles. Include columns, walls, drainage channels, power cabinets, fire equipment, trees, access roads, and neighbouring structures. I recommend measuring at several points because irregular sites can appear large enough on paper while creating narrow installation zones.
Decide whether the court is intended for a private club, hotel, school, residential development, sports centre, or public facility. A single training court may need less surrounding infrastructure than a commercial venue with spectators and multiple courts. If the project will expand later, reserve logical corridors for additional courts, shared reception, storage, and maintenance access rather than placing the first court too close to permanent obstacles.
The foundation must be sufficiently level, stable, and compatible with the court’s anchoring system. Outdoor sites should prevent standing water beneath or around the artificial grass surface, while indoor sites should address floor flatness and moisture conditions. Before production, I recommend exchanging foundation drawings, drainage details, anchor positions, finished-floor levels, and permissible tolerances with the supplier.
Lighting should be planned for the entire court rather than added after the enclosure is installed. A project may use LED fittings, but the appropriate wattage, beam angle, illuminance, glare performance, and mounting arrangement depend on the venue and local electrical design. For reference, many commercial lighting discussions use target illuminance values in the range of several hundred lux, but the final specification should be calculated for the actual court and user requirements.
The most common mistake is confusing the official playing area with the complete site requirement. Another is approving the concrete base before confirming the supplier’s anchor layout, door position, and external frame dimensions. Buyers also sometimes overlook the path needed to bring glass panels and steel members into the building or onto the site.
A further mistake is selecting flooring without considering drainage, infill maintenance, cleaning equipment, and replacement planning. Panoramic glass also needs an appropriate cleaning and inspection routine because fingerprints, dust, and moisture can affect appearance even when the structure remains sound. I recommend including operation and maintenance requirements in the purchasing specification, not only the initial product price.
When comparing panoramic padel court suppliers, I suggest asking for a dimensioned layout, material schedule, glass and steel specifications, foundation requirements, installation scope, packing information, warranty terms, spare-parts availability, and estimated production schedule. The quotation should clearly state whether it includes artificial grass, lighting, net posts, doors, anchoring components, transport, installation supervision, and commissioning support. It should also explain which items must be prepared locally by the buyer.
At Tianjin juzhixin Sports, I help B2B buyers move from a general panoramic padel court idea to a more practical purchasing specification. Our support can include preliminary court layout discussion, enclosure and sports flooring selection, outdoor or indoor application review, and coordination of the information required for a project quotation. Because site dimensions, local construction conditions, and shipping arrangements differ, I prefer to confirm the application before recommending a final configuration.
To begin an inquiry, prepare the available site length and width, indoor or outdoor location, number of courts, intended user level, preferred delivery destination, and whether you need artificial grass or a complete court solution. A site sketch, photos, ceiling height, foundation information, and access details can make the technical review more efficient. We can then clarify the required footprint, material options, estimated lead-time range, packaging scope, and next design steps without presenting unverified assumptions as fixed specifications.
The key answer is that a panoramic padel court uses a 10 m × 20 m internal playing area, but a buyer should reserve more space for the enclosure, foundation, access, drainage, lighting, and venue circulation. As a preliminary planning figure, approximately 12 m × 22 m or more may be reasonable for one court, yet the supplier’s external drawing and local regulations must determine the final layout. Height, glass structure, wind exposure, flooring, and installation access are equally important as length and width.
My recommended next step is to measure the site, identify indoor or outdoor constraints, define the intended venue function, and request a dimensioned proposal before construction begins. Send Tianjin juzhixin Sports your site information and project requirements so we can help evaluate feasibility and prepare a suitable panoramic padel court and sports flooring solution for your B2B project.
Want more information on panoramic padel court? Feel free to contact us.